Using Adaptec's RAID Configuration Utility
The Adaptec RAID Confi guration Utility includes the following major compo- nents:
1.Array Confi guration Utility: this utility allows the user to create and manage arrays. You can also use this utility to initialize and scan disk drives.
2.SCSISelect Unity (or Serial/SATASelect): this utility allows the user to configure the control settings for disk drives.
3.Disk Utility: this utility allows the user to format and verify disk drives.
To Use the Adaptec RAID Configuration Utility
(*Note: the configuration procedures listed below are applicable to
SAS, SATA and SCSI settings.)
To use the Adaptec RAID Confi guration Utility, please follow the steps listed below:
1.Properly confi gure the jumper settings of your
2.Enable the RAID function in the system BIOS. (*Please refer to the User's Guide that came with your system for system BIOS confi guration.)
3.Turn on your computer. The BIOS screen as shown below will display during system bootup:
