Chapter 3: RAID Confi guration
Rebuilding Arrays
Note: If there is an interruption during array building or disk initialization, you can rebuild an array. You can only confi gure RAID 1 for array rebuild. If a hard disk fails and there is no hot spare array available, you will need to create a hot spare drive fi rst before creating an array. (Refer to "Creating HotSpare Drives" for more information.)
To Rebuild an array:
1.From the main menu, select Manage Arrays. From the list of arrays, select the array you want to rebuild.
2.Press <Ctrl> and <R> simultaneously to rebuild an array.
To Rescan Disk drives
1.Power on your system. When prompted, press <Ctrl> and <A> simultane- ously to access the Array Confi guration Utility.
2.When the Array Confi guration Utility Main Menu appears, select "Array Con- fi guration Utility" and press <Enter>. The following screen will display:
3.From the Array Confi guration Main Menu appears, select "Rescan Drives" and press <Enter>. The Array Confi guration Utility starts to rescan the selected disk drives as shown in the screen on the next page:
