SUPER MICRO Computer AOC-LPZCR1 Using Adaptecs SATASelect Utility, To Use the SATASelect Utility

AOC-LPZCR1/AOC-SOZCR1 Manual

3.2.2 Using Adaptec's SATASelect Utility

(*Please refer to Page 3-1 for SATA Jumper Confi guration before using the SATASelect Utility. Please refer to Section 3..2.1 for SCSI and Section 3.2.3 for SAS Utility Confi guration settings.)

To Use the SATASelect Utility

1.Turn on your computer. When prompted, press <Ctrl> and <A> to access the Adaptec RAID Confi guration Utility.

2.From the RAID Confi guration main menu (Figure 3.1), select "SATASelect Utility" and press <Enter>.

Using the Controller Configuration Utility

3.To confi gure the SATA RAID Controller or view the settings, select "Controller Confi guration" from the sub-menu and press <Enter>.

5.To confi gure an item on the submenu, use the arrow keys to select the item and press <Enter>. A dialogue box will appear.

5.Select the desired setting in the dialogue box and press <Enter> to select the option.

6.Press <F6> to restore the default setting. Press <Esc> to return to the previ- ous menu.

Using the SATA Configuration Utility

1.Turn on your computer. When prompted, press <Ctrl> and <A> to access the Adaptec RAID Confi guration Utility.

2.From the RAID Confi guration main menu (Figure 3.1), select "SATASelect Utility" and press <Enter>.

Using the Controller Configuration Utility

3.From the SATASelect Sub Menu, select SATA Confi guration and press <En- ter>. The status of SATA Device Confi guration will display.

4.Use the arrow keys to select the item you wish to confi gure and press <Enter>. A option dialogue box will display.

5.Use the arrow keys to select the desired setting and press <Enter>.

6.Press <F6> to load the default setting. To return to the previous menu, press <Esc>.

(*Note: Refer to Section 3.2.4 on Page 3-24 for Physical Confi guration Settings.)

3-22