Setting Ethernet speed
You can select the communication speed for Ethernet connections.
1Press Menu until Network appears on the bottom line of the display and press OK.
2Press the Scroll buttons until Ethernet Speed appears and press
OK.
3Press the Scroll buttons until the speed you want appears and press OK.
4Press Stop to return to Standby mode.
Restoring the network configuration
You can return the network configuration to its default settings.
1Press Menu until Network appears on the bottom line of the display and press OK.
2Press the Scroll buttons until Clear Setting appears and press
OK.
3Press OK when Yes appears to restore the network configuration.
4Power the printer off and back on.
Printing a network configuration page
The network configuration page shows how the network interface card on your printer is configured.
1Press Menu until Network appears on the bottom line of the display and press OK.
2Press the Scroll buttons until Network Info appears and press OK.
3Press OK when Yes appears.
The network configuration page prints out.
Using SetIP program
This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface. Especially, it is for the network administrator to set several network IPs at the same time.
1Insert the driver CD provided along with your machine.
2Start Windows Explorer and open the X drive. (X represents your
3Double click Application > SetIP
4Open the language folder you want to use.
5Double click Setup.exe to install this program.
6From the Windows Start menu, select Programs > Samsung Network Printer Utilities > SetIP.
7Select the name of your printer and click “ ”.
Note
• If you cannot find your printer name click “ | ” to refresh the |
list. |
|
8Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply.
Note
• If you do not know the network card’s MAC address, print the machine’s network information report.
9Click OK to confirm the settings.
10Click Exit to close the SetIP program.
4.3 <Network setup>