Fault codes
How to recognize a fault code
31
US CA
When a fault has occurred, the DishDrawer® will continuously beep every second.
The fault code will be displayed on the electronic display for models with LCD and on the wash program selector for models with no LCD.
Each fault code is shown in the following chart.
How to attend to a fault code
1Press the button to remove the fault code.
2If the fault code and continuous beeps cannot be removed by pressing the button, turn the DishDrawer® off at the power supply.
3We recommend you check the following chart and correct the fault where possible.
4 After attending to the fault, turn the DishDrawer® on at the power supply.
5 If the fault code and continuous beeps remain, turn the water and power supply off to the DishDrawer®.
6 When calling your Authorized Service Center, advise them of the fault code that has appeared on the DishDrawer®. This information will help the Authorized Service Center respond to your request.