US CA
32
Fault codes
Fault Codes | Possible Causes | What to Do | |||
F1 |
|
| Flood switch has been | Turn the water and power supply to the | |
|
| ||||
|
|
|
| activated. | DishDrawer® off and call your Authorized |
|
|
|
| ||
|
|
|
|
| Service Center. |
F2
Motor problem. | Call your Authorized Service Center. |
F3
Temperature sensor | Ensure water coming in through the inlet |
failed. | hose is less than 150 oF. You may need to |
| install a tempering valve on your water |
| supply. |
F4
F5
F6
Faulty temperature | Call your Authorized Service Center. |
sensor or element |
|
Lid fault | 1 Turn power supply to DishDrawer off, |
| then turn on power supply. Fault may |
| reset. |
| 2 Call your Authorized Service Center. |
Lid fault | 1 Turn power supply to DishDrawer off, |
| then turn on power supply. Fault may |
| reset. |
| 2 Call your Authorized Service Center. |
F7
Lid fault | Call your Authorized Service Center. |
F8
Electrical problem | 1 Turn power supply to DishDrawer off. |
| 2 Call your Authorized Service Center. |
F9
Electronics | Call your Authorized Service Center. |
malfunction. |
|
