US CA
6
Operating instructions - Controls (models with no LCD)
If you have a double DishDrawer®, each drawer has its own controls and can run independently of the other.
Power button
The
button turns the DishDrawer® on or off. Opening the drawer will automatically turn the DishDrawer® on for 30 seconds. To end a wash program in mid cycle, press the
button. Any water in the DishDrawer® will be pumped out.
Start/Pause button 
The 
button starts a wash program. Press the 
button to pause or restart the DishDrawer® during a wash program. When paused, wait for three beeps before opening the drawer. Forcing the drawer open while in mid cycle may cause damage or injury.
Delay start
The 
button also sets the Delay start feature which can delay the start of a wash program from 1 to 12 hours.
To activate Delay start
1Press and hold the 
button until the light above the 
button turns orange (or purple, depending on your model).
2Continue holding the 
button down until the desired delay time has been reached. The DishDrawer® will emit audible ‘beeps’ as you hold the 
button down, each beep indicates
another hour delay.
3The DishDrawer® will start once the delay time has elapsed and the drawer is closed.
To cancel Delay start
Press the
button.
Lock button 
/ 
(optional)
The | / | button activates/deactivates the Keylock or the Childlock functions. |
