Q-Logic SN0054621-00 E Display VPD Information, Configure HBA Level Parameters, CLI Option -vpd

4 – Interactive Mode Commands

HBA Level Info & Operations Menu (CLI Option -i)

S

HBA_Reserved_TCP_Config	:	0x0001314c
HBA_Delayed_ACK	:	on

Note that not all parameters are available for all HBA models.

Configure HBA Level Parameters

(CLI Option -n)

Select the Configure HBA Level Parameters option to configure a single port on any HBA, whether it has only one port or more than one. Be sure to select the working adapter you want to configure. (For details, see “Select HBA Port (No CLI Option)” on page 4-49.)

When you enter this option, SANsurfer iSCSI HBA CLI queries you for each HBA parameter in sequence. It shows the current value of that parameter in brackets [value]. Type a new value for each parameter, and then press ENTER. To leave a parameter set to the current value, just press ENTER.

Save Changes and Reset HBA

Before resetting the HBA, ensure no connections are active. Select the Save Changes and Reset HBA option to save your changes and reset all ports on the HBA.

Display VPD Information

(CLI Option -vpd)

When you select the Display VPD Information option, the vital product data (VPD) information is displayed for the current working adapter. Information varies by manufacturer, or may not be provided by the manufacturer at all. For example, the adapter’s manufacturer may choose to show the following:

„Product description

„Part number

„EC (European community) level

„Manufacture ID

„FRU (field replaceable unit) number

„CCIN (customer card identification number)

„Brand Field

4-18 SN0054621-00 E