Q-Logic SN0054621-00 E manual Display Send Targets, Display Discovered Targets, Add a Send Target

A

4 – Interactive Mode Commands Port Level Info & Operations Menu

Select the Target Discovery Menu option to view the HBA Target Discovery Menu containing the following options:

1.Display Send Targets (see page 4-45)

2.Display Discovered Targets (see page 4-45)

3.Add a Send Target (see page 4-45)

4.Mark Send Target for re-discovery (see page 4-45)

5.Remove a Send Target (see page 4-46)

6.Login and persist a discovered target (see page 4-46)

7.Duplicate a Persistent Target (see page 4-46)

8.Duplicate a Discovered Target (see page 4-46)

9.Remove Discovered Target (see page 4-46)

10.Display iSNS Settings (see page 4-46)

11.Configure iSNS (see page 4-46)

12.Save changes and reset HBA (if necessary) (see page 4-18)

13.Select HBA Port (see page 4-49)

14.Refresh (see page 4-49)

15.Exit (see page 4-50)

Display Send Targets

Select the Display Send Targets option to view a list of send targets in the SANsurfer iSCSI HBA CLI database, as well as the persistent send targets in the HBA database.

Display Discovered Targets

Select the Display Discovered Targets option to view a list of discovered targets in the SANsurfer iSCSI HBA CLI database.

Add a Send Target

Select the Add a Send Target option to add a new send target to either the SANsurfer iSCSI HBA CLI database or the HBA database. You must save your changes before send targets are discovered. When you are prompted to make the target persistent, respond yes to add the target to the HBA database and log in the targets. For the added target to be discovered, you must use the Save Target/CHAP Settings option (see page 4-47).

Mark Send Target for Re-discovery

Select the Mark Send Target for Re-discoveryoption to have SANsurfer iSCSI HBA CLI discover send targets when you select the Save Target/CHAP Settings option (see page 4-47).

SN0054621-00 E 4-45