Q-Logic SN0054621-00 E manual Port Network Settings Menu see

4 – Interactive Mode Commands

S

Table 4-1. Command Line Interface Menu (Continued)

Level 1 Level 2 Level 3 Level 4

2.Port Network Settings Menu (see page 4-20)

1.Display Network Settings (see page 4-20)

2.Configure IP Settings (see page 4-21)

3.iSNS Settings (see page 4-21)

4.Select HBA Port (see page 4-49)

5.Save Changes and Reset HBA (see page 4-18)

6.Refresh (see page 4-49)

7.Exit (see page 4-50)

3.Edit Configured Port Settings Menu (see page 4-22)

1.Display Configured Port Settings (see page 4-22)

2.Change Port iSCSI Alias Name (see page 4-22)

3.Port Firmware Settings Menu (see page 4-23)

1.Display Configured Port Settings (see page 4-23)

2.Edit a Specific Port Setting (see page 4-24)

3.Configure iSCSI Settings (see page 4-24)

4.Configure Firmware Settings (see page 4-25)

5.Configure Device Settings (see page 4-25)

6.Configure Basic Settings (see page 4-26)

7.Configure Advanced Settings (see page 4-26)

8.Configure IPv6 Settings (see page 4-27)

9.Configure IPv6 TCP Settings (see page 4-28)10. Save Changes and Reset HBA (see page 4-18)11. Select HBA Port (see page 4-49)

12. Refresh (see page 4-49)

13. Exit (see page 4-50)

4.Legacy QLA4010 Restore Default Port Settings (see page 4-28)

5.Select HBA Port (see page 4-49)

6.Save Changes and Reset HBA (if necessary) (see page 4-18)

7.Refresh (see page 4-49)

8.Exit (see page 4-50)

4.Port Restore Factory Defaults (see page 4-28)

4-4 SN0054621-00 E