Q-Logic SN0054621-00 E manual Import HBA Configuration

A

5– Non-Interactive Mode Commands Non-interactive Commands

The following shows an example of how the HBA port information might appear:

0.HBA 0 Port: 0 HBA Port Instance: 0 HBA Model: QLA4050C

HBA Serial Number: FS20525B03135	FW Version: 2.2.4.45	Type: Copper
IP Address: 192.168.3.7
Alias:

iSCSI name: iqn.2000-04.com.qlogic.fs10506a02810.1

1.HBA 1 Port: 0 HBA Port Instance: 1 HBA Model: QLA4062C

HBA Serial Number: AS40637A04673	FW Version: 3.0.1.18	Type: Copper
IP Address: 192.168.3.22
Alias:

iSCSI name: iqn.2000-04.com.qlogic.as10506a02810.1

2.HBA 1 Port: 1 HBA Port Instance: 2 HBA Model: QLA4062C

HBA Serial Number: AS40637A04673	FW Version: 3.0.1.18	Type: Copper
IP Address: 192.168.3.38
Alias:

iSCSI name: iqn.2000-04.com.qlogic.as10506a02810.1

3.HBA 2 Port: 0 HBA Port Instance: 3 HBA Model: QLA4010

HBA Serial Number: FS20407B03135	FW Version: 3.0.1.17	Type: Copper
IP Address: 192.168.3.72
Alias:

iSCSI name: iqn.1991-05.com.microsoft.steinway.qlogic.org

For information on the interactive version of this command, see “List All QLogic iSCSI HBA Ports Detected (CLI Option -i)” on page 4-48.

-import

(Import HBA Configuration)

To import an HBA configuration from a file (see “-save (Save Host Configuration)” on page 5-28), enter the -importcommand as follows:

-import <hba_no_target> <hba_no_Source> [A] [F N I T C B] <File Name>

Where:

<hba_port_inst> = The specific HBA to which the data is written

<hba_port_inst_ = The file with the HBA configuration you want. source>

A= Configure all imported parameters (F, N, I, T, C, B). F = Configure the firmware.

N = Configure the network parameters.

SN0054621-00 E 5-15