Q-Logic SN0054621-00 E manual Dtlia, Dtrem

5– Non-Interactive Mode Commands Non-interactive Commands

S

-dtdupd

(Duplicate a Persistent Target)

To duplicate a discovered target that is persistent, enter the -dtdupdcommand as follows:

-dtdupd <hba_port_inst> <target_id>

A duplicate target is assigned a new iSCSI initiator ID (ISID) and can then be used to create a redundant path.

For information on the interactive version of this command, “Duplicate a Persistent Target” on page 4-46.

-dtli

(Login and Persist a Discovered Target)

To log in a specific discovered target, enter the -dtlicommand as follows:

-dtli <hba_port_inst> <target_instance>

To obtain the target instance, use the command “-dtdsp (Display Discovered Targets)” on page 5-9.

For information on the interactive version of this command, “Login and Persist a Discovered Target” on page 4-46.

-dtlia

(Login and Persist a Discovered Target)

To log in all discovered targets, enter the -dtliacommand as follows:

-dtlia <hba_port_inst>

For information on the interactive version of this command, “Login and Persist a Discovered Target” on page 4-46.

-dtrem

(Remove Discovered Target)

To remove a non-persistent discovered target, enter the -dtremcommand as follows:

-dtrem <hba_port_inst> <target_instance>

To obtain the target instance, use the command “-dtdsp (Display Discovered Targets)” on page 5-9.

For information on the interactive version of this command, “Remove Discovered Target” on page 4-46.

5-10 SN0054621-00 E