Q-Logic SN0054621-00 E manual Stathba, Stdsp, Strd, Strema

5– Non-Interactive Mode Commands Non-interactive Commands

S

-stat

(Display Port Statistics)

To view the port statistics for the specified HBA, enter the -statcommand as follows:

-stat <hba_port_inst>

For a list of the statistics that are displayed and information on the interactive version of this command, see “Display Port Statistics (CLI Option -stat)” on page 4-32.

-stathba

To displays HBA level statistics, enter the -stathbacommand as follows:

-stathba <hba_port_inst>

-stdsp

To view the send targets, enter the -stdspcommand as follows:

-stdsp <hba_port_inst>

-strd

To execute a rediscovery of targets for the specified send target, enter the -strdcommand as follows:

-strd <hba_port_inst> <target_instance>

To obtain the target instance, use the -dtdspcommand.

-strem

To remove the specified send target, enter the -stremcommand as follows:

-strem <hba_port_inst> <target_instance>

To obtain the target instance, use the -dtdspcommand.

-strema

To removes all send targets, enter the -stremacommand as follows:

-strema <hba_port_inst> <target_instance>

-t

(Display Target Information)

To view target information, enter the -tcommand as follows:

5-30 SN0054621-00 E