Q-Logic SN0054621-00 E manual Table C-1. Target Parameters, Parameter Alias Function Value

C – Target Parameters

S

Table C-1. Target Parameters

Parameter	Alias	Function	Value
IPv4TOS	IPV4TOS	When the DDB entry is for an	0–255
		IPv6 device (the IPv6 Device
		bit—Options field bit 8—is
		set), this field specifies the
		IPv6 TC field to be used in
		the IPv6 TCP packets trans-
		mitted from the firmware to
		the device. When the DDB
		entry is for an IPv4 device
		(the IPv6 Device bit is reset),
		this field specifies the value
		of the TOS field to be used in
		the IPv4 TCP packets
IIPv4TTL	IPV4TTL	Time-to-Live (in hops). Each	0–255
		router decrements TTL
		before transmitting it. Router
		discards the datagram when
		TTL = zero.
TGT_4022_Delayed_Ack	TGT4022DACK	Target QLA4022 delayed	on/off
		acknowledgement
TGT_DDB_IPv6	TGT_DDB_IPv6	Target device database IPv6	on/off
TGT_DefaultTimeout	TGTDTO	Target default timeout	2†
TGT_DefaultTime2Retain		Target default time to retain	20*†
TGT_DevType		Target device type	0*†
TGT_DIF_Enable	TGTDIFFEN_IPv6	Target DIF enable	on/off
TGT_ExeCount		Target execution count	0*†
TGT_ExeThrottle	TGTET	Target execution throttle	64†
TGT_FirstBurstLen	TGTFB	Target first burst length	256†
TGT_Force_Negotiate_Main_iSCSI_	TGTFNMIK	Target forces negotiation	on/off
Keys
TGT_InitiatorSessID	TGTISID	Target initiator session ID	‡
TGT_IPv6_Address		Target IPv6 address	IPv6
TGT_IPv6_Flow_Label	TGTFLWLBL	Target IPv6 flow label	‡
TGT_IPv6_iSCSI_Name	TGTINAME_IPv6	Target IPv6 iSCSI name	‡

C-2 SN0054621-00 E