Q-Logic SN0054621-00 E manual Display Port Statistics, Reset Statistics, Display ARP Table, So on

4 – Interactive Mode Commands Port Level Info & Operations Menu

S

3.Type the number corresponding to the data pattern you want, and then press ENTER.

4.If you want to stop the loopback test if an error occurs, type y for the Stop on error[Y]? option.

After the test is done, the number of failed tests and successful tests are shown.

Display Port Statistics

(CLI Option -stat)

When you select the Display Port Statistics option, the HBA statistical information is displayed for the current HBA. For a list of the HBA statistics, see Appendix B HBA Statistics.

Reset Statistics

(CLI Option -sreset)

When you select the Reset Statistics option, the HBA port statistics counters are immediately reset.

Display ARP Table

(CLI Option -arp)

Select the Display ARP Table option to view the Address Resolution Protocol (ARP) cache, which keeps a record of host port connections with other hardware (such as targets) on the network. The IP address/MAC address pairs are dynamic entries that are removed after 10 minutes.

Display Connection Error Log

Select the Display Connection Error Log to view the error log for each HBA connection. For example:

inst 0 Number of entries = 0xd (13)

=======================
inst 0 Entry Index: 0
=======================
Delta Time (in seconds)	: 0.000
Timestamp (or seconds)	: Wed May 28, 2008 11:05:41 AM
Target ID	: 2
Original State	: Logged in (0x25)
Entry Type	: Sense data (0x4)
Error Type	: Removable medium changed or the target has been reset
	(0x6)
Detail Code	: power on, reset, or bus device reset occurred (0x2900)

Number Consecutive Errors: 1

and so on.

4-32 SN0054621-00 E