Q-Logic SN0054621-00 E manual Dce, Defbidi, Delchap, Display Destination Cache IPv6 only

A

5– Non-Interactive Mode Commands Non-interactive Commands

For information on the interactive version of this command, see “Install HBA Driver, All Adapters (CLI Option -d)” on page 4-11.

-dc

(Display Destination Cache [IPv6 only])

The IPv6 destination cache contains the IP address, next-hop IP address, and path MTU information about both local and remote destinations. For multicast and on-link unicast destinations, the next-hop IP address always matches the destination IP address. For unicast destinations that are off-link, the next hop IP address is the IP address of the router.

To display the destination cache, enter the -dccommand as follows:

-dc<hba_port_inst>

For information on the interactive version of this command, see “Display Destination Cache (IPv6) (CLI Option -dc)” on page 4-33.

-dce

To display the connection error logs for up to 100 latest connections, enter the -dce command as follows:

-dce <hba_port_inst> <target_id> <filename>

If <hba_port_inst> and <target_id> are not specified, all entries for all HBA ports will be displayed. If <filename> is specified, then the log will be written to that file.

-defbidi

(Add a Default BIDI CHAP)

To add a default BIDI (bidirectional) CHAP entry to the specified HBA port, enter the -defbidicommand as follows:

-defbidi<hba_port_inst> <CHAP Secret>

Issuing this command resets the HBA.

For information on the interactive version of this command, see “Add a Default BIDI CHAP (CLI Option -defbidi)” on page 4-43.

-delchap

(Delete a CHAP Entry)

To delete the specified CHAP entry, enter the -delchapcommand as follows:

-delchap<hba_port_inst> <CHAP>

Issuing this command resets the HBA.

For information on the interactive version of this command, “Delete a CHAP Entry (CLI Option -delchap)” on page 4-44.

SN0054621-00 E 5-7