Q-Logic SN0054621-00 E manual Pad, Pbootcode, Pdt, Pet, Pinfo

5– Non-Interactive Mode Commands Non-interactive Commands

S

-pad

To view all targets for a port, enter the -padcommands as follows:

-pad <hba_port_inst>

-pb

(Bind Target)

Enter the -pbcommand to bind a target (make it persistent):

-pb<hba_port_inst> <Target ID>

For information on the interactive version of this command, see “Bind Target (CLI Option -pb)” on page 4-39.

-pbootcode

(Set Primary Boot Target Information)

To set the primary bootcode boot target and LUN, enter the -pbootcodecommand as follows:

-pbootcode<hba_port_inst> <tgt> <lun>

This command is not active for the PPC.

For information on the interactive version of this command see “Set Primary Boot Target Information (CLI Option -pbootcode)” on page 4-35.

For information on secondary boot code, see “-sbootcode (Set Secondary Boot Target Information)” on page 5-29.

-pdt

To disable a target, enter the -pdtcommand as follows:

-pdt <hba_port_inst> <targetId>

-pet

To enable a target, enter the -petcommand as follows:

-pet <hba_port_inst> <targetId>

-pinfo

(Port Information)

To view port information for the specified HBA, enter the -pinfocommand as follows:

-pinfo<hba_port_inst>

For information on the interactive version of this command see “Port Link Settings Menu” on page 4-19.

5-24 SN0054621-00 E