Q-Logic SN0054621-00 E Display Program Version Information, Host Level Info & Operations Menu

4 – Interactive Mode Commands

Display Program Version Information (CLI Option -ver)

S

Display Program Version Information

(CLI Option -ver)

When you select this option, SANsurfer iSCSI HBA CLI displays the following information:

SANsurfer iSCSI HBA CLI

Program version : x.x.xx.xx

iSDMAPI (iSCSI SAN device manager API) xx.xx.xx.xx QLSDM.DLL 06 IOCTL

Copyright 1999-2008 QLogic Corp.

Host Level Info & Operations Menu

Before making a selection from the Host Level Info & Operations Menu, you must select an HBA.

To choose an HBA:

1.Type the number for the Select HBA Port option, and then press ENTER.

2.A list of HBA port instances appears.

3.Type the number for the HBA port instance you want to change, and then press ENTER.

4.Make changes in the following submenus:

1.Display General System Information (see page 4-9)

2.Import HBA Menu, Multiple Adapters (see page 4-9)

3.Update Firmware, Multiple Adapters (see page 4-11)

4.Install HBA Driver, All Adapters (see page 4-11)

5.Select HBA Port (see page 4-49)

6.Refresh (see page 4-49)

7.Exit (see page 4-50)

5.For each submenu, save the changes by typing the number for Save changes and reset HBA, and then pressing ENTER. This saves your changes and resets all ports on the HBA.

6.To update the firmware with these changes, type the number for Refresh, and then press ENTER. If you do not select this option, your changes will not be visible in SANsurfer iSCSI HBA CLI.

4-8 SN0054621-00 E