Q-Logic SN0054621-00 E manual Starting Non-interactive Mode

3 – Getting Started

Starting Non-interactive Mode

S

The Windows system displays the Main Menu. For example:

main Interactive Menu

-------------------------------------------------------

Program Version: 1.2.00.xx Driver Version: 2.1.x.x (STOR w32) IC: 1

Current HBA/Port Information:	HBA Alias: qlogic
HBA: 0 Port: 0 HBA Port Index:	1 Model: QLA4050C
IP Address: 192.168.104.129	Link: Up

Port iSCSI Name: iqn.2000-04.com.qlogic:qla4050C.fs10506a02810.1 Port iSCSI Alias:

-------------------------------------------------------

1.Display Program Version Information

2.Host Level Info & Operations

3.HBA Level Info & Operations

4.Port Level Info & Operations

5.List All QLogic iSCSI HBA Ports detected

6.Help

7.Select HBA Port

8.Refresh

9.Exit

enter selection:

Depending on the menu selection, SANsurfer iSCSI HBA CLI prompts for more input as needed. For example, if you select Select HBA Port, SANsurfer iSCSI HBA CLI lists the current HBAs and prompts you to select an HBA whose settings you want to view or change.

Starting Non-interactive Mode

Type the following in a command window to start SANsurfer iSCSI HBA CLI in non-interactive mode:

iscli <Parameters>

SANsurfer iSCSI HBA CLI executes the command options, and then terminates. To list all of the available command line parameters, type the following:

iscli -h

All command line options must be preceded by the dash (–) notation. Most options have a corresponding menu selection in interactive mode.

3-2 SN0054621-00 E