Q-Logic SN0054621-00 E manual Configure IPv6 Settings, „ Vlanid, „ VLANUserPriority, „ Zio

A

4 – Interactive Mode Commands Port Level Info & Operations Menu

„IPv6_DAD_Count

„IPv6_Hop_Limit

„IPv6_MCast_Listnr_Disco_Enable

„IPv6_ND_Reachable_Timer

„IPv6_ND_Retransmit_Timer

„IPv6_ND_Stale_Timeout

„IPv6_TCP_Time_Stamp

„IPv6_TCP_Window_Scale

„IPv6_Traffic_Class

„IPv6_VLAN_Enable

„IPv6_VLAN_ID

„IPv6_VLAN_User_Priority

„iSCSI_Data_Digests

„iSCSI_Header_Digests

„iSCSI_Immediate_Data

„iSCSI_Initial_R2T

„iSCSI_Name

„KeepAliveTO

„Large_Frames

„MaxBurstLen

„MaxOutstandingR2T

„TCP_Time_Stamp

„TCP_Window_Scale

„VLAN_Enable

„VLAN_ID

„VLAN_User_Priority

„ZIO

Each setting is displayed with the current value in brackets, for example:

KeepAliveTO [30] :

To change the value, type the new value after the prompt. To keep the current value, press ENTER at the prompt. The next setting appears. The settings are displayed one by one (but not alphabetically, as in the preceding bullet list).

Table A-1 on page A-1describes these settings.

Configure IPv6 Settings

(CLI Options -netconf, -netconf6, -isns, -isns6, -ip, and -nc)

When you select the Configure IPv6 Settings option, SANsurfer iSCSI HBA CLI shows each current IPv6 setting and gives you the option of entering another:

IPv6_Addr_Local_Link [fe80:2c0:ddff:fe08:e6f6] :_

IPv6_Addr_Routable0 [3ffe:4032:1077:2006:2c0:ddff:fe08:e6f6} :_

IPv6_Addr_Routable1 [::] :_

Default_IPv6_Router [fe80:20d:29ff:fe24:713f] :_

SN0054621-00 E 4-27