4-16 Operational Modes
Supervisor Menu
Change Password
1.Select Change Password from the Supervisor Menu, by pressing Enter.
Enter New Password
_
2. Type in the new password, and press Enter.
Note: The default password is “263” (CME). The new password may not be larger than 32K.
Verify New Password
_
3.Type in the new password again (to confirm), and press Enter. If the same password is entered, the new password will be written to memory and the following message displays.
Note: If the verify password entered is not the same, a “Denied PW Chg” message displays. Press Enter to return to the Supervisor Menu.
Changed PW
Press Enter
4.This message displays when the new password has been written into memory. Press the Enter key to return to the Supervisor Menu.
Serial Number
The serial number option displays the serial number of the 5992 unit. Select the Serial Number item on the Supervisor Menu and press Enter. The serial number of the unit displays. Press any key to return to the Supervisor Menu.
Hardware Configuration
The hardware configuration option is used to change the size of the hardware configuration space. This option is currently not available.
