6-2 Chapter 6: Diagnostics Specification
Note: If Supervisor Menu or Diagnostics Menu is not selected within 10 seconds after ‘self test’, the unit exits this screen and goes into the digitizer calibration screen.
1b. To start diagnostics from any screen, touch each corner of the screen in a counter clockwise motion starting with the upper left hand corner using the stylus or your finger. You must finish by pressing the same upper left hand corner of the screen where you started. There are a total of 5 screen touches. The Supervisor Menu Diagnostics Menu selection screen will display.
Touch the screen five times in a counter clock wise direction, in each corner starting and finishing with a touch in the upper left hand corner of the screen. The Supervisor Menu Diagnostics Menu selection screen will display.
2. Select Diagnostics Menu with the 5992 stylus or your finger.
