Q-Logic SN0054621-00 E manual Isns6, ISNS Settings

A

5– Non-Interactive Mode Commands Non-interactive Commands

-isns<hba_port_inst> [iSNS IP Address] [iSNSPORT <port_number>]

If you do not specify the [iSNS IP Address] parameter, the command disables the iSNS client on the specified HBA port.

Issuing this command resets the HBA.

For information on the interactive version of this command, see “iSNS Settings (CLI Option -isns)” on page 4-21.

-isns6

(iSNS Settings)

To configure the iSNS settings for IPv6 (QLE406x and newer), enter the -isns6command as follows:

-isns <hba_port_inst> [iSNS IPv6-or-IPv4 Address] [-iSNSPORT <port_number>]

If you do not specify the [iSNS IP Address] parameter, this command disables the iSNS client on the specified HBA port.

Issuing this command resets the HBA.

For information on the interactive version of this command, see “iSNS Settings (CLI Option -isns)” on page 4-21.

-l

(List LUN Information)

Use the -lcommand to view the following information about LUNs attached to the selected target:

„HBA/Target/LUN number

„Vendor name

„Product ID

„Product revision

„LUN size

You can view this information for a specific LUN or for all LUNs attached to the selected target.

To list the LUN information, enter the -lcommand as follows:

-l<hba_port_inst> <Target ID [LUN ID]>

If you do not include the LUN ID parameter, all the LUNs on the specified target are shown.

For information on the interactive version of this command, see “List LUN Information (CLI Option -l)” on page 4-47.

SN0054621-00 E 5-17