Q-Logic SN0054621-00 E manual HBA Level Info & Operations Menu, HBA Information, CLI Option -ch

4 – Interactive Mode Commands

HBA Level Info & Operations Menu (CLI Option -i)

S

HBA Level Info & Operations Menu

(CLI Option -i)

The HBA Level Info & Operations Menu provides the following options for each HBA port instance:

1.HBA Information (see page 4-12)

2.HBA Options Menu (see page 4-13)

3.HBA Reset (see page 4-14)

4.HBA Diagnostic Menu (see page 4-15)

5.HBA Level Parameters Menu (see page 4-17)

6.Display VPD Information (see page 4-18)

7.Select HBA Port (see page 4-49)

8.Refresh (see page 4-49)

9.Exit (see page 4-50)

On each submenu, save the changes by typing the number for Save changes and reset HBA, and then pressing ENTER. This saves your changes and resets all ports on the HBA.

To update the firmware with these changes, type the number for Refresh, and then press ENTER. If you do not select this option, your changes will not be visible in SANsurfer iSCSI HBA CLI.

HBA Information

(CLI Option -ch)

When you select the HBA Information option, information is listed for the working adapter; for example:

Board Type	: QLE4060C
Chip Model	: ISP4032
Chip Version	: 0
Serial Number	: QS40620A00034
MAC Address	: 00-C0-DD-08-97-40
Driver Version	: 2.1.4.18 (STOR w32)
Firmware Version	: 3.0.1.45
ROM Version	: 1.0.0.0
iSCSI Version	: 0.20
BIOS/UEFI Version	: 1.00
BIOS/UEFI Full Version	: 1.00

4-12 SN0054621-00 E