7 FRAME ASSEMBLY
Fasten Side Jambs to Head Jamb
Butt and align head jamb to side jambs.
Fasten side jambs to head jamb with
(3)#10 x 2 1/2” flat head screws through lock and hinge jamb into head jamb.
#10 x 2 1/2” |
flat head |
screws |
Inswing Sill Option
End seal pad
Apply End Seal Pads
Remove from paper backing and apply adhesive side of end seal pads at bottom of each jamb.
Caulk Entire Sill Gain
Apply a 1/4" bead of sealant to sill gain and a bead that matches profile of sill.
Sealant
Match profile of fixed portion of sill. Leave areas of adjusting riser free of caulk.
3/4" |
2 ½" flat head |
screws |
Fasten Sill to Side Jambs
Fit and align sill between lock and hinge jamb.
Starting approximately 3/4” from interior side of jamb, drill (3) 1/8” dia. pilot holes through each jamb into sill substrate.
Fasten each jamb to sill with (3) #10 x 2 1/2” flat head screws.
8