Therma-Tru Hinged Patio Door System Single Panel Assembly Unit Remove Components From Packaging

NOTE:

A large work area is needed to assemble the frame kit. Cover area with cardboard from one or more door panel cartons to protect frame parts and floor. If available a carpeted table can be used to avoid marring prefinished surfaces.

1

REMOVE COMPONENTS FROM PACKAGING

NOTE:

Product that is purchased with the multi-point lock system will have additional instructions in the handle hardware box.

Installation instructions will be included in the site package.

2

ATTACH HINGES TO DOOR

Standard Hinge Option

Use Correct Hinge Leaf

Leaves applied to door have 2 knuckles.

Leaves applied to jamb have 3 knuckles.

2-knuckle 3-knuckle door leaf jamb leaf with tabs

#10 x 3/4”

Align and Install Hinges

Place tabs firmly against door.

Fasten 2-knuckle hinge leaves with #10 x 3/4” flat head screws.

Place hinge tabs firmly against door.

NOTE:

Outswing packages come with a non-removable pin (NRP) hinge. It is recommended to attach the hinge in the middle location. For 8’ heights, two NRP hinges are in- cluded. NRP hinges have locating tabs. Fasten to door panel using same method as for unassembled hinges, placing tabs against door face to locate hinge.

Rotate to opposite side for left-hand application

Right-hand application shown

Non-removable Pin Hinge

3