Therma-Tru Hinged Patio Door System Single Panel Assembly Unit Install Weatherstrip, Head Jambs

Models: Hinged Patio Door System Single Panel Assembly Unit

1 16

Page 6

Press in kerf with hand.

Align starting end with head gain.

Fit and secure in place along full length.

Long Reach

Trim finish end flush with end of jamb.

Align starting end with head gain.

Short Reach

Fit and secure in place along full length.

Align starting end with head gain.

Long Reach

Fit and secure in place along full length.

Hinge Jamb

Trim weatherstrip as shown.

Image 6

Contents

Therma-Tru Hinged Patio Door System Read all instructions before startingSingle Panel Unit Assembly PATIO DOOR SYSTEMSDoor Bottom Inswing Door Panel Door Bottom Part identification - continued Tools/materials requiredStandard Hinge Option REMOVE COMPONENTS FROM PACKAGINGATTACH HINGES TO DOOR Align and Install HingesATTACH HINGES TO DOOR - continued INSTALL DOOR BOTTOMAdjustable Hinge Option Attach hinge to doorHead Jambs INSTALL WEATHERSTRIPApply Weatherstrip to Active Frame Parts Hinge JambsMulti-pointLock Option INSTALL STRIKESStandard Strike Option - Inswing Slide Strike Assembly onto Lock JambATTACH HINGES TO JAMB Standard Hinge OptionFasten Hinges to Hinge Jamb Fasten Side Jambs to Head Jamb 7 FRAME ASSEMBLYInswing Sill Option Apply End Seal PadsPartially Set Sill Screws in Jambs FRAME ASSEMBLY - continuedOutswing Sill Option Caulk Entire Sill GainAlign and Install Side Flanges FLANGE INSTALLATIONInstall Top Flange FlangeMake 2 “Insert Skids” DOOR INSTALLATIONStandard Hinge Option Place Door into FrameInstall Hinge Pins DOOR INSTALLATION - continuedAdjustable Hinge Option Engage Hinge KnucklesMulti-pointLock Option ATTACH TRANSPORT CLIPStandard Lock Option Attach Transport Clip to DoorSee “Unit Installation” instructions UNIT READY FOR INSTALLATIONATTACH TRANSPORT CLIP - continued Attach Transport Clip to Door03-01-04 PATIO DOOR SYSTEMS2004 Therma-TruCorp AIHPSNGL