Therma-Tru Hinged Patio Door System Single Panel Assembly Unit ATTACH HINGES TO DOOR - continued

2

ATTACH HINGES TO DOOR - continued

Adjustable Hinge Option

Attach hinge to door

Locate the “H” and “V” markings on hinges. The two “H” hinges go in top and bottom locations with the “V” hinge in the center.

For 8’, the “V” hinge is located second from top of door.

Insert thick side of hinge into pocket in door and fasten with #8 x 1-1/4” flat head screws.

NOTE:

Inswing hinges are reversible by removal of hinge pin. Outswing hinges are reversible by removal of set screw then removal of hinge pin.

“H” marked hinge shown

Marking

#8 x 1-1/4”

3	INSTALL DOOR BOTTOM
	Interior	NOTE:
	side	Outswing units do not
	of	require door bottoms.
	door
		Caulk and Fasten Door Bottom
		Select a sealant that provides excellent
		adhesion to both plastic and wood.
		Apply sealant as shown to ends of
		door bottom.
		Center door bottom and press into
		rail kerfs.
Sealant		Secure each end of door bottom with
		(1) #8 x 3/4” wafer head screw.
	#8 x 3/4”
	wafer head

4