Part identification - continued
#6 x 3/4” | #10 x 3/4” |
flat head screw | flat head screw |
#8 x 5/8” | #8 x 3/4” |
flat head screws | flat head screw |
#8 x | #8 x 2” |
flat head screw | flat head screw |
#8 x 3/4” | #10 x |
wafer head screw | flat head screw |
Tools/materials required
This is a listing of tools that may be required to assemble unit.
•Drill/screw gun
•Phillips head drive bit or screwdriver #2 & #3
•Silicone sealant and caulk gun
•Utility knife
•Rubber mallet
•Hammer
•Staple gun with 1/2” x 7/16” crown staples
•3/32” & 1/8” dia. drill bit
•(2) 2 x 6 boards - 38” long
2