Lenovo E31, E30, EDGE 13 manual When installing, For MT0196 and MT0492, b a b

When installing: Attach the system board so that the battery pins of the system board are attached firmly to the guide hole of the base cover as shown in in this.

Make sure that the connectors are attached firmly.

Note: Loosen the screws

9 , but do not remove them.

9

9

10 11

When installing:

•Before you attach the fan assembly to the computer, apply thermal grease, at an amount of 0.2 grams,

on the part marked as in the following figure. Either too much or too less application of grease can cause a thermal problem due to imperfect contact with a component. You need to peel the thin film off from the rubbers b .

For MT0196 and MT0492:

b

a

b

72Hardware Maintenance Manual