1.POWER SWITCH
Push this switch to enter the standby mode. To switch the power off, push again this switch.
2.POWER ON BUTTON
In the standby mode, press this button, then this unit is turned on to enter the operating mode.
3.STANDBY BUTTON
In the operating mode, press this button then this unit is turned off to enter the standby mode.
4.STANDBY INDICATOR
5.SPEAKER A, B SELECTOR BUTTONS
These buttons allow you to select various combinations of speakers as follows:
�To drive A speakers, press only the SPEAKER A button (“SPK A” is displayed).
�To drive B speakers, press only the SPEAKER B button (“SPK B” is displayed).
�To drive both A and B speakers, press the SPEAKER A(or B) and B(or A) buttons in order.(“SPK A B” is displayed).
�When using headphones for private listening, press these buttons in order to switch off the speaker A and B (“SPK OFF” is displayed).
6.HEADPHONE JACK
Stereo headphones with a standard 1/4 inch plug can be plugged into this jack for private listening.
7.INPUT SELECTOR BUTTONS
Press the button to select the desired input source.
8.TONE BUTTON
When adjusting the tone (bass and treble), press this button to select the desired tone mode. �Each time this button is pressed, the tone mode
is changed to bass or treble.
9.BALANCE BUTTON
When adjusting the sound volume balance, press this button to enter the balance mode.
10.BALANCE, TREBLE/BASS UP/DOWN (▲/▼) BUTTONS
At the balance mode, adjust the sound volume balance between left and right speakers with these buttons.
At the desired tone mode, adjust the tone as desired with these buttons.
11.TONE DIRECT BUTTON
Press this button to listen to a program source without the tone effect.
12.MEMORY BUTTON
Press this button to store preset stations.
13.TUNING/PRESET MODE BUTTON
Press this button to select the tuning mode or the preset mode.
14.NUMERIC BUTTONS (0 ~ 9)
Press these buttons to select or to store preset stations directly.
15.TUNING/PRESET UP/DOWN
Press these buttons to tune in the desired stations.
16.FM MODE BUTTON
Press this button to select the desired FM mode. �Each time this button is pressed, the FM mode is changed to the stereo mode or the mono mode.
17.PRESET SCAN BUTTON
Press this button to scan the stations in the preset sequence.
18.VOLUME CONTROL KNOB, UP/DOWN ( ▲/▼) BUTTONS
Adjust the volume to a comfortable listening level with this knob or these buttons.
19.MUTE BUTTON
Press this button to temporarily mute the sound. Press again to resume the previous sound level.
20.DIMMER BUTTON
Press this button to select the brightness of the fluorescent display as desired.
�Each time this button is pressed, the brightness of the fluorescent display changes as follows:
�ON � dimmer � OFF
21.SLEEP BUTTON
Press this button to activate the sleep timer for a specified period of time.
�Each time this button is pressed, the sleep time changes as follows:
�10 � 20 � 30 � 60 � 90 � OFF Unit : minutes
22.REMOTE SENSOR
This receives the signals from the remote control unit.
23.FLUORESCENT DISPLAY
For details, see the previous page.
24.RDS BUTTONS (Regional option for Europe, etc.)
Use these buttons when listening to RDS broadcast. For more information, refer to pages 16~18.
8
