Presetting radio stations
• You can store up to 30 preferred stations in the memory.
1. Tune in the desired station with auto or manual tuning.
2. Press the MEMORY button.
• “MEM” is flickering for 5 seconds.
3. Select the desired preset number (1~30) and press the MEMORY button.
• When using the NUMERIC buttons on the remote control.
Examples) For “3” :
For “15” :
For “30” :
• The station has now been stored in the memory.
• When using the NUMERIC buttons, the station is stored automatically without pressing the MEMORY button.
• A stored frequency is erased from the memory by storing another frequency in its place.
• If “MEM” goes off, start again from the above step 2.
4. Repeat the above steps 1 to 3 to memorize other stations.
�MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off, are memorized.
•INPUT SELECTOR settings
•Preset stations,etc.
�Note
•If the electricity fails or the AC input cord is disconnected for more than several days, they are all cleared. So you should memorize them again.
14
