Sherwood RX-4109 manual Connecting Speakers, Switched Ac Outlet, Ac Input Cord

5. CONNECTING SPEAKERS

• Usally SPEAKER A terminals are used for only a pair of speakers. When you have another pair of speakers, SPEAKER B terminals can be used.

• Never short-circuit the + and - speaker cords.

• Be sure to connect speakers firmly and correctly according to the channel (left and right) and the polarity (+ and -).

�Note

• For safe amplifier operation, use the speakers with impedance of over 8Ω when you use only SPEAKER A or B terminals and use the speakers with impedance of over 16Ω when you use both SPEAKER A and B terminals.

6. SWITCHED AC OUTLET

• This outlet is switched on (power-on mode) and off (standby mode) according to power control as follows (Maximum total capacity is 100 W (0.43A)).

Standby mode - Switched AC outlet off

Power-on mode - Switched AC outlet on

7. AC INPUT CORD

• Plug the cord into a wall AC outlet.

6