Equaliser | Reset Sound |
mMENU → Sound → Equaliser → E | mMENU → Sound → Reset Sound → E |
Adjust the equaliser to customise the volume and pitch, and enhance the richness of the sound | Reset all sound settings to the factory defaults. |
output. |
|
•• 100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the level of |
|
specific bandwidth frequencies. |
|
•• Reset: Resets the equaliser to its default settings. |
|
――Available only when Sound Mode is set to Standard. |
|
Auto Volume |
|
mMENU → Sound → Auto Volume → E |
|
The volume can vary depending on the channel. |
|
Automatically equalise the volume level when switching to another channel. |
|
•• Off / Normal / Night |
|
Normal equalises the volume level on each channel, so that when you change channels, the |
|
volume level is the same. |
|
Night equalises and decrease the volume level on each channel, so each channel is quieter. |
|
Night is useful at night, when you may want to keep the volume low. |
|
――To use the volume control of a connected source device, set Auto Volume to Off. A change to |
|
the volume control of the connected source device may not be applied if Auto Volume is set |
|
to Normal or Night. |
|
67