Anynet+ (HDMI-CEC)

Anynet+ (HDMI-CEC)

Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.

•• Off / On

――You can only control Anynet+ devices using the product remote control, not the buttons on the product.

――The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

――Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.

――Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.

Troubleshooting for Anynet+

Problem

Possible Solution

 

 

Anynet+ does not work.

•• Check if the device is an Anynet+ device. The Anynet+

 

system supports Anynet+ devices only.

 

•• Check if the Anynet+ device power cord is properly

 

connected.

 

•• Check the Anynet+ device’s Video/Audio/HDMI cable

 

connections.

 

•• Check whether Anynet+ (HDMI-CEC)is set to On in the

 

System menu.

 

•• Check whether the remote control is Anynet+ compatible.

 

•• Anynet+ doesn’t work in certain situations. (initial setup)

 

•• If you have removed and then reconnected the HDMI cable,

 

please make sure to search devices again or turn your

 

product off and on again.

 

•• Check if the Anynet+ function of the Anynet device is set on.

 

 

I want to start Anynet+.

•• Check if the Anynet+ device is properly connected to the

 

product and check if the Anynet+ (HDMI-CEC)is set to On in

 

the System menu.

 

 

I want to exit Anynet+.

•• Press the SOURCE button on the product remote control

 

and select a non- Anynet+ device.

 

 

The message

•• You cannot use the remote control when you are configuring

“Disconnecting

Anynet+ or switching to a view mode.

Anynet+ device ...”

•• Use the remote control after the product has completed

appears on the screen.

Anynet+ configuration or has finished switching to Anynet+.

 

 

 

The Anynet+ device

•• You cannot use the play function when initial setup is in

does not play.

progress.

 

 

78