Gain Video gain, Changing the setting in Gain

( 2 ) GAIN (Video gain)

When the image is dark even if the lens iris is open, change the gain (video gain) to get the proper video level. For the gain adjustment of the unit, MANU (Manual) and OFF (0dB) modes are provided.

1MANU (Manual gain)

Gain adjustment is performed on the GAIN menu. The adjustment range is from 0dB to 18dB in 1dB steps.

2OFF

Gain is fixed at 0dB.

Move the "→" to MODE, push the [DATA UP], [DATA DOWN], and select one of the two modes between MANU and OFF.

(2. 1) Changing the setting in GAIN

Move up down

Select the desired

by pushing

value by pushing

MENU UP, DOWN

DATA UP, DOWN

-- GAIN --

MODE

MANU

0dB

• Gain mode MANU, OFF

• Manual gain adjustment 0 dB to 18 dB (1 dB step)

(a) Changing the gain in MANU mode

1Move the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Adjust the manual gain by pushing [DATA UP], [DATA DOWN] buttons.

Page 20

Image 20

Toshiba ik-tf7u instruction manual Gain Video gain, Changing the setting in Gain, Changing the gain in Manu mode

Contents

IK-TF7U Following information is only for EU-member states Safety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty places Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Result displayed Meaning Temp LOW OFF GainShading Correction Items Controlled by the Screen Display Available selections Mode Setting by the Screen Display Using the Menus Menus Shutter Electronic shutterManual Flicker may be large Changing the setting in Manu mode Mode = ManualPartial scanning setting Menu UP, Down Data UP, Down Changing the shutter speed setting Changing the setting in SS synchro. scan modeMode = SS Changing the setting in E.TRG mode Changing the setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing the setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Mode = E.TRG E.TRG = RR Changing the setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing the setting in GainChanging the gain in Manu mode WHT BAL White balance MANU/OFF Changing gamma correctionChanging master pedestal Changing R pedestal Sync Option Setting by the frame Returning to factory settingsSetting by 1H Synchro. Scan Operation 1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingE. TRG External trigger Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Long Term Exposure RR Reset restartInput Timing Chart Example When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning on External sync signal polarity Using the unit with external sync signalExternal Sync External sync frequency range Input Output Signal Specificatoins Vertical Output Waveform Timing Chart Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call Limited Warranty Toshiba CCD Camera One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities

Toshiba ik-tf7u Gain Video gain, Changing the setting in Gain, Changing the gain in Manu mode

Models: ik-tf7u