Changing the setting in SS synchro. scan mode

(1. 2) Changing the setting in SS (synchro. scan) mode

Move up down		Select the desired
by pushing		value by pushing
MENU UP, DOWN		DATA UP, DOWN




	-- SHUTTER --
	MODE	SS


	SS	OFF
	SS	OFF
	PART	OFF
	PART	OFF

•Sutter mode MANU, SS, E.TRG

•Synchro. scanning setting

•Partial scanning switch OFF/40fps/50fps/60fps/70fps/80fps/90fps/ E40fps/E50fps/E60fps/E70fps/E80fps/E90fps

<MODE = SS>

(a) Changing the shutter speed setting

1Move the "→" to SS by pushing [MENU UP], [MENU DOWN] buttons.

2Select the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial scanning setting

1Move the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The slow shutter speed may increase the fixed pattern noise and/or the white pixels. This is a charac- teristic of CCD, and is not a symptom of malfunction.

Page 15

Image 15

Toshiba ik-tf7u Changing the setting in SS synchro. scan mode, Mode = SS, Changing the shutter speed setting

Contents

Following information is only for EU-member states IK-TF7U Safety Precautions Avoid placing in humid, smoky, vaporized or dusty places Disclaimer Table of Contents Components Names and Functions Connector Pin Assignments ConnectionStandard Connection Operation Automatic Black BalanceWhite Balance Temp LOW Result displayed Meaning Gain Shading CorrectionOFF Available selections Items Controlled by the Screen Display Using the Menus Mode Setting by the Screen Display Flicker may be large MenusShutter Electronic shutter Manual Menu UP, Down Data UP, Down Changing the setting in Manu modeMode = Manual Partial scanning setting Changing the setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing 1P SNR exposure time setting Changing the setting in E.TRG modeChanging the setting in 1P SNR mode Changing the polarity of inputting trigger pulse setting Changing the setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Mode = E.TRG E.TRG = PW SNR Changing the setting in PW SNR mode Changing the setting in PW SR mode Mode = E.TRG E.TRG = PW SRMode = E.TRG E.TRG = RR Changing the setting in Gain Changing the gain in Manu modeGain Video gain WHT BAL White balance Changing R pedestal MANU/OFFChanging gamma correction Changing master pedestal Option Sync Synchro. Scan Operation Setting by the frameReturning to factory settings Setting by 1H Fval Lval Dval 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing E. TRG External trigger 1 Pulse Trigger SYNC-RESET Picture Output Timing 1P SR 1 Pulse Trigger Sync Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset 1 Pulse Width Trigger SYNC-RESET Picture Output Timing PW SR Pulse width trigger SYNC-RESET RR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning on When Partial Scanning Mode is onPartial Read Partial Scanning OFF All pixels scanning External sync frequency range External sync signal polarityUsing the unit with external sync signal External Sync Input Output Signal Specificatoins Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart RGB, 3CCD Specifications External Appearance Diagram Before Making a Service CallSymptom Items to be checked Your Responsibilities Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts How to Obtain Warranty Service Step-By-Step Procedures

Toshiba ik-tf7u instruction manual Changing the setting in SS synchro. scan mode, Mode = SS

Models: ik-tf7u