1P SR 1 Pulse Trigger Sync Reset | Toshiba ik-tf7u instruction

( 2 ) 1P SR (1 Pulse Trigger Sync Reset)

Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, the vertical sync signal is reset and frame images are output.

(2. 1) 1 Pulse Trigger SYNC-RESET Picture Output Timing

Negative polarity mode

Trigger*1

Positive polarity mode

About 1 ∝s

Exposure period*2

Exposure completion

0 to 1H*3

(Internal VD)

RGB data (video interval image)

FVAL

LVAL,

DVAL

28H (Partial scanning OFF)

24H (Partial scanning 40fps)

32H (Partial scanning 50fps)

38H (Partial scanning 60fps)

42H (Partial scanning 70fps)

44H (Partial scanning 80fps)

47H (Partial scanning 90fps)

*1: Externally input signal

*2: Exposure time is determined by the setting of "7. 2 (1.3) Changing each setting in E.TRG mode".

*3: VD is generated after 0 to 1H following the completion of the exposure period and the video is synchro- nized to this and output.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

26

Image 26

Toshiba ik-tf7u instruction manual 1P SR 1 Pulse Trigger Sync Reset, Pulse Trigger SYNC-RESET Picture Output Timing

Contents

IK-TF7U Following information is only for EU-member states Safety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty places Table of Contents Components Names and Functions Standard Connection Connector Pin AssignmentsConnection White Balance OperationAutomatic Black Balance Result displayed Meaning Temp LOW OFF GainShading Correction Items Controlled by the Screen Display Available selections Mode Setting by the Screen Display Using the Menus Manual MenusShutter Electronic shutter Flicker may be large Partial scanning setting Changing the setting in Manu modeMode = Manual Menu UP, Down Data UP, Down Changing the shutter speed setting Changing the setting in SS synchro. scan modeMode = SS Changing the polarity of inputting trigger pulse setting Changing the setting in E.TRG modeChanging the setting in 1P SNR mode Changing 1P SNR exposure time setting Changing 1P SR exposure time setting Changing the setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Mode = E.TRG E.TRG = RR Changing the setting in PW SR modeMode = E.TRG E.TRG = PW SR Gain Video gain Changing the setting in GainChanging the gain in Manu mode WHT BAL White balance Changing master pedestal MANU/OFFChanging gamma correction Changing R pedestal Sync Option Setting by 1H Setting by the frameReturning to factory settings Synchro. Scan Operation E. TRG External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Long Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning on External Sync External sync signal polarityUsing the unit with external sync signal External sync frequency range Input Output Signal Specificatoins Vertical Output Waveform Timing Chart Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCD Symptom Items to be checked External Appearance DiagramBefore Making a Service Call How to Obtain Warranty Service Step-By-Step Procedures Limited Warranty Toshiba CCD CameraOne 1 Year Limited Warranty of Labor and Parts Your Responsibilities