Toshiba ik-tf7u - page 18

18

-- SHUTTER --

MODE E.TRG

E.TRG PW SNR

TRG.P

PART OFF

<MODE = E.TRG E.TRG = PW SNR>

• Partial scanning switch

OFF/40fps/50fps/60fps/70fps/80fps/90fps/

E40fps/E50fps/E60fps/E70fps/E80fps/E90fps

Input trigger pulse : positive polarity

Input trigger pulse : negative polarity

• E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

• Input trigger pulse setting at PW SNR and PW SR

• Sutter mode MANU, SS, E.TRG

Move up down

by pushing

MENU UP, DOWN

Select the desired

value by pushing

DATA UP, DOWN

(1. 3. 3) Changing the setting in PW SNR mode

(a) Changing the polarity of inputting trigger pulse setting

1Move the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing the partial scanning setting

1Move the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select the mode by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD

cameras become: fixed pattern noise, white pixels, etc.

Contents

Main CAMERA CONTROL UNIT IK-TF7U INSTRUCTION MANUAL SAFETY PRECAUTIONS Safety icons Disclaimer Limitation of Usage Protection of Personal Information TABLE OF CONTENTS Copyright and Right of Portrait 1. CAUTIONS ON USE AND INSTALLATION Vertical Output Waveform Timing Chart... ( 2 ) This product is 3CCD color camera with digital video output. 2. COMPONENTS 3. NAMES AND FUNCTIONS 4. CONNECTION 4. 1 Standard Connection DC IN 12V 4. 3 Connector Pin Assignments 4. 2 Cautions on Connection 5. OPERATION 5. 1Automatic Black Balance 5. 2 White Balance Page 5. 3 Gain 5. 4 Shading Correction 6. ITEMS CONTROLLED BY THE SCREEN DISPLAY 7. MODE SETTING BY THE SCREEN DISPLAY 7. 1 Using the Menus 7. 2 Menus ( 1 ) SHUTTER (Electronic shutter) Page Page Page Page Page Page ( 2 ) GAIN (Video gain) ( 3 ) WHT BAL (White balance) ( 4 ) PROCESS ( 6 ) OPTION ( 5 ) SYNC 7. 3 Synchro. Scan Operation ( 1 ) Setting by 1H ( 2 ) Setting by the frame ( 7 ) Returning to factory settings 7. 4E. TRG (External trigger) ( 1 ) 1P SNR (1 Pulse Trigger Sync Non Reset) ( 2 ) 1P SR (1 Pulse Trigger Sync Reset) ( 3 ) PW SNR (Pulse width trigger SYNC-NON RESET) ( 4 ) PW SR (Pulse width trigger SYNC-RESET) ( 5 ) RR (Reset restart) 7. 5Partial Read ( 3 )When Partial Scanning Mode is ON Blanking interval B Blanking interval DTotal A Video interval C * ( 1 ) External sync signal polarity ( 2 ) External sync frequency range ( 3 ) Using the unit with external sync signal 8. INPUT OUTPUT SIGNAL SPECIFICATOINS 2.0s 5.0s 9. OUTPUT WAVEFORM TIMING CHART ( 1 ) Horizontal Output Waveform Timing Chart ( 2 ) Vertical Output Waveform Timing Chart RGB data FVAL 10. SPECIFICATIONS The designs and specifications are subject to change without notice. 11. EXTERNAL APPEARANCE DIAGRAM 12. BEFORE MAKING A SERVICE CALL Limited Warranty TOSHIBA CCD Camera Copyright 2007 Toshiba America, Inc. All rights reserved.