PW SR Pulse width trigger SYNC-RESET | Toshiba ik-tf7u specs

( 4 ) PW SR (Pulse width trigger SYNC-RESET)

The trigger input to the CC1 of the DIGITAL terminal develops 1 frame images.

(4. 1) 1 Pulse Width Trigger SYNC-RESET Picture Output Timing

Negative polarity mode

Trigger*1

Positive polarity mode

About 1 ∝s	About 7 ∝s
	Exposure period*2
Exposure completion
	0 to 1H

(Internal VD)*3

RGB data (video interval image)

FVAL

LVAL,

DVAL

28H (Partial scanning OFF)

24H (Partial scanning 40fps)

32H (Partial scanning 50fps)

38H (Partial scanning 60fps)

42H (Partial scanning 70fps)

44H (Partial scanning 80fps)

47H (Partial scanning 90fps)

*1: Externally input signal

*2: Exposure time = Trigger pulse width + 6 ∝s

(Valid trigger pulse width is 2 ∝s or greater for external trigger shutter operation.)

*3: VD is generated after 0 to 1H following the completion of the exposure period and the video is synchro- nized to this and output.

Note:

When the next trigger is input before completion of the output of the video corresponding to the trig- ger, there will be an effect on the video.

28

Image 28

Toshiba ik-tf7u PW SR Pulse width trigger SYNC-RESET, Pulse Width Trigger SYNC-RESET Picture Output Timing

Contents

IK-TF7U Following information is only for EU-member states Safety Precautions Disclaimer Avoid placing in humid, smoky, vaporized or dusty places Table of Contents Components Names and Functions Connection Connector Pin AssignmentsStandard Connection Automatic Black Balance OperationWhite Balance Result displayed Meaning Temp LOW Shading Correction GainOFF Items Controlled by the Screen Display Available selections Mode Setting by the Screen Display Using the Menus Menus Shutter Electronic shutterManual Flicker may be large Changing the setting in Manu mode Mode = ManualPartial scanning setting Menu UP, Down Data UP, Down Mode = SS Changing the setting in SS synchro. scan modeChanging the shutter speed setting Changing the setting in E.TRG mode Changing the setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time setting Mode = E.TRG E.TRG = 1P SR Changing the setting in 1P SR modeChanging 1P SR exposure time setting Changing the setting in PW SNR mode Mode = E.TRG E.TRG = PW SNR Mode = E.TRG E.TRG = PW SR Changing the setting in PW SR modeMode = E.TRG E.TRG = RR Changing the gain in Manu mode Changing the setting in GainGain Video gain WHT BAL White balance MANU/OFF Changing gamma correctionChanging master pedestal Changing R pedestal Sync Option Setting by the frame Returning to factory settingsSetting by 1H Synchro. Scan Operation 1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingE. TRG External trigger Fval Lval Dval 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output Timing PW SNR Pulse width trigger SYNC-NON Reset Pulse Width Trigger SYNC-NON Reset Picture Output Timing PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Input Timing Chart Example RR Reset restartLong Term Exposure When Partial Scanning Mode is on Partial ReadPartial Scanning OFF All pixels scanning Partial Scanning on External sync signal polarity Using the unit with external sync signalExternal Sync External sync frequency range Input Output Signal Specificatoins Horizontal Output Waveform Timing Chart Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCD Before Making a Service Call External Appearance DiagramSymptom Items to be checked Limited Warranty Toshiba CCD Camera One 1 Year Limited Warranty of Labor and PartsHow to Obtain Warranty Service Step-By-Step Procedures Your Responsibilities