Q-Logic SN0054621-00 E manual Interactive Mode Error Codes, Return Name Description

D Error Codes

This appendix provides the error codes for both CLI modes, interactive and non-interactive.

Interactive Mode Error Codes

Table D-1lists the return, name, and description for each interactive mode error code.

NOTE:

The return codes in this table are sorted numerically for ease of use.

Table D-1. Interactive-Mode Error Code Descriptions

Return	Name	Description
0	CORE_STATUS_GOOD	Success
100	CORE_ERR_INV	Invalid parameter: use -hswitch to see proper
		usage.
101	CORE_ERR_MEM_FAIL	Failed to allocate memory error.
102	CORE_ERR_SDM_FAIL	A call to the SDM Library failed.
103	CORE_ERR_NO_HBA	HBA instance specified is invalid.
104	CORE_ERR_HBAOPEN	Failed to open the HBA for an operation.
105	CORE_ERR_SAVE_INITFW	Failed to save the INITFW settings to the HBA.
106	CORE_ERR_HBARESET	Failure resetting the HBA.
107	CORE_ERR_RO_PARAM	Cannot change a read-only parameter.
108	CORE_ERR_MISSING_PARAM	A required parameter was missing.
109	CORE_ERR_FWUPD	An error occurred updating the firmware.
110	CORE_ERR_INVFILE	The file name entered is invalid or does not
		exist.

SN0054621-00 E D-1