Q-Logic SN0054621-00 E manual Tos, Enable, IPV4TOS, IPV4TTL, IPV6MLDEN, Ipll, IPR0, IPR1, IPV6DAD

A– Port- and HBA-level Parameters Port-level Parameters

S

Table A-1. Port Settings (Continued)

Parameter	Value	Alias	Description
IPv4_TOS_Enable	on, off	TOS_	IPv4 type of service QLA405x and QLE406x
		ENABLE	only.
IPv4_TOS	0–255	IPV4TOS	Controls the value of the type of service (TOS)
			field of IPv4 headers transmitted by the firmware
			on iSCSI connections. The firmware uses the
			value when transmitting IPv4 TCP packets on
			iSCSI connections.
IPv4_TTL	0–255	IPV4TTL	Time-to-Live (in hops). Each router decrements
			TTL before transmitting it. Router discards the
			datagram when TTL = zero.
IPv6_MCast_Listnr_	on, off	IPV6MLDEN	When enabled, the firmware supports the IPv6
Disco_Enable			Multicast Listener Discovery (MLDv1) protocol
			by sending MLD Listener Report and Listener
			Done messages. When disabled, the firmware
			firmware does not support the MLD protocol.
IPv6_Addr_Local_Link	IPv6	IPLL	Contains the IPv6 link local address.
	address
IPv6_Addr_Routable0	IPv6	IPR0	Contains the IPv6 first manually-configured
	address		routable address.
IPv6_Addr_Routable1	IPv6	IPR1	Contains the IPv6 second manually-configured
	address		routable address.
IPv6_DAD_Count	0–255	IPV6DAD	Specifies the count for the IPv6 Duplicate
			Address Detection (DAD) process.
IPv6_Gratuitious_Neighbor	on, off	IPv6GNAE	When enabled, the firmware issues a series of
_Ad_Enable			gratuitous neighbor advertisement messages for
			its IP during initialization, when a valid IP
			address has been configured.
IPv6_Hop_Limit	0–255b	IPV6HL	Specifies the IPv6 hop limit value to be used in
			IPv6 TCP packets transmitted from the firmware
			on iSCSI connections. Receiving an IPv6 router
			advertisement with a nonzero value in the cur-
			rent hop field will cause this field to be overwrit-
			ten with the current hop limit advertised by the
			router.

A-4 SN0054621-00 E