I n s t a l l i n g a n d S e t t i n g U p Yo u r S y s t e m

To connect the enable cable:

1.Disconnect the original monitor cable from the computer.

2.Attach the enable cable to the monitor port on the computer.

3.Connect the monitor cable to the enable cable.

4.Attach the USB connector of the enable cable to a USB port.

USB connection

Enable cable connection

Monitor cable connection

X-RITE Sensors

X-RITE Monitor Optimizer DTP94+EK (MonacoOPTIX)

Use this USB sensor on CRT or LCD monitors.

Counterweight -

 

Attach to the

USB connection -

sensor cable to

Connect to a USB

counterbalance

port on your

the sensor.

computer.

 

Suction cup -

 

Attach to the

 

cable and then

 

fasten the suction

 

cup to the screen.

Sensor - Hang in

Supports the

instrument's

front of the monitor

weight when

to measure

using CRT

patches.

monitors.

 

To position the sensor during calibration:

1.Attach the counterweight to the cable.

2.If using a CRT monitor, attach the suction cup to the sensor cable and then fasten the suction cup to the screen.

IMPORTANT

Never use the suction cup on an LCD monitor.

K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e

1 3

Page 23
Image 23
Kodak 4F3882 manual Rite Sensors, To connect the enable cable, To position the sensor during calibration