Ve r i f y i n g
Verifying the Print Film Look
Verify the print film look to measure the quality of the print film simulation.
NOTE
This feature is not available in the VISION2 HD System Edition. Also, you cannot verify a print film look created for a digital projector or HD/SD display.
To verify the print film look:
1.From the main window, click the Verify icon.
Either the Verification window opens or you are prompted to perform a Dark Gain correction to reset the sensor.
If you are prompted to perform a Dark Gain Correction:
a)Place the sensor on a dark surface and make sure that no light can reach it. Do not attach the sensor to the monitor for this correction.
b)Click OK.
IMPORTANT
If the Dark Gain Correction fails, see “Dark Gain Correction Failure” on page 78.
7 0 | K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e |
