I n s t a l l i n g a n d S e t t i n g U p Yo u r S y s t e m

SEQUEL Chroma 4/C Serial Sensor for CRT Monitors

The sensor connects to a USB port and attaches to a CRT monitor with suction cups.

Attach to monitor with suction cups

Connect to serial port on your computer

NOTE: On IRIX, do not use serial port 1.

During calibration, attach the sensor as shown here.

Press the sensor firmly to the screen being careful not to press too hard. Center it within the color patch. Make sure that all suction cups are pressed against the monitor. If any of the suction cups come loose, the results may be unreliable and the process should be repeated. If the sensor falls off the monitor, reattach it and restart the process.

Sensors Recommended for Digital Projection

MINOLTA CS-100A

PHOTO RESEARCH PR-650

1 8

K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e

Page 28
Image 28
Kodak 4F3882 manual Sequel Chroma 4/C Serial Sensor for CRT Monitors