Tr o u b l e s h o o t i n g
Characterization Failure
•Repeat the characterization making sure that the:
−Room is dimly lit or a dark cloth is placed over the monitor
−Sensor is securely attached to the monitor if the sensor has suction cups
−Enable cable and the sensor connections are properly made
−Dark Gain Correction of the sensor is performed correctly
−Monitor is warmed up properly
•The monitor brightness may be set too low. Use the factory default setting. If that fails, increase the brightness.
Verification Failure
•Repeat the calibration and characterization making sure that the:
−Room is dimly lit or a dark cloth is placed over the monitor
−Sensor is attached to the monitor securely if the sensor has suction cups
−Enable cable and sensor connections are properly made
−Dark Gain Correction of the sensor is performed correctly
−Monitor is warmed up properly
•Refer to the Verification logs. See “Verification Logs” on page 73.
K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e | 7 7 |
