C h a r a c t e r i z a t i o n

5.For an HD/SD device:

a)Position the sensor on the color patch.

b)Click one of the following options:

Automatically Measure from Sensor to allow the software to automatically move through the color patches and enter the data. This method can be used with either the .dpx images (if you create a sequence from the images) or with a KODAK Video Tape. Within the software that you are using to display the images, set the patch duration to 15 seconds per patch (for use with X-RITE and SEQUEL Sensors).

Measure from Sensor to allow the sensor to read and enter data from one color patch at a time. You must click this button for each color patch that is displayed.

6.For a digital projector:

a)Use a colorimeter or spectrophotometer to measure the patches.

We recommend the MINOLTA CS-100A or the PHOTO RESEARCH PR-650.

b)Click one of the following options:

Automatically Measure from Sensor to allow the software to automatically move through the color patches and enter the data (for use with MINOLTA CS-100A or PHOTO RESEARCH PR-650 Devices that are connected to the computer). If you’re using the MINOLTA CS- 100A or the PHOTO RESEARCH PR-650, set the patch duration to 40 seconds per patch. This method can be used with either the .dpx images (if you create a 40 sec. per patch sequence from the images) or with a KODAK Video Tape (using the 40 sec. sequence).

Measure from Sensor to allow the sensor to read and enter data from one color patch at a time. You must click this button for each color patch that is displayed.

NOTE

You can also import files created by the MINOLTA CS-100, MINOLTA CS- 100A, or PHOTO RESEARCH PR-650. Go to File > Import External Measurements and import the appropriate file. The table is populated with the data in the file.

7.When you are finished, click File > Save Characterization File.

IMPORTANT

To accurately emulate the print film look or video look on your display, you must load this characterization file in the Viewer. This information is used by the Viewer to create a LUT. See “Creating a Print Film Look” on page 56 or “Creating a Video Look” on page 57.

4 6

K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e

Page 56
Image 56
Kodak 4F3882 manual When you are finished, click File Save Characterization File