Kodak 4F3882 manual Calibration Procedure, To automatically calibrate a monitor

C a l i b r a t i o n

The Calibration Procedure

To automatically calibrate a monitor:

1.Click Auto from the drop-down Display Mode menu if it isn’t already selected.

NOTE

Auto mode is only available if you have connected the enable cable to your computer.

2.Click the Calibrate icon.

If this is the first time that you have calibrated your current monitor, follow the on-screen prompts to run a monitor evaluation. See “Monitor Evaluation” on page 35.

Either the Calibration window opens or you are prompted to perform a Dark Gain Correction to reset the sensor.

If you are prompted to perform a Dark Gain Correction:

a)Place the sensor on a dark surface and make sure that no light can reach it. Do not attach the sensor to the monitor for this correction.

b)Click OK.

IMPORTANT

If the Dark Gain Correction fails, see “Dark Gain Correction Failure” on page 78.

3 2 K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e