I n t r o d u c t i o n
Main Window
The main window contains a selection box for the Display Mode and an icon for each step in the process.
Display Mode: Select Auto if you will be using the enable cable to calibrate. If not, it is important that you select Manual.
Calibrate: Opens the Calibration window where you attach a sensor to measure the luminance and chromaticity of a series of color patches.
Characterize: Opens the Characterization window where you attach a sensor to measure the luminance and chromaticity of a series of color patches. Choose Manual Characterization Assistant to characterize alternate display devices, such as HD/SD displays and digital projectors.
Viewer: Opens the Viewer where you load and view images, customize looks, and build and export LUTs.
Verify: Opens the Verification window where you attach a sensor and verify the quality of the monitor setup and the print simulation.
Exit: Closes the application.
From the Options menu, select Setup to set the parameters and configure the system. See “Setting the Options” on page 24.
From the File menu, load your settings, save your settings or reset to the factory default settings. See “Saving and Loading Settings” on page 30.
K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e | 5 |
