B e fo r e C a l i b r a t i n g
Setting the Options
Go to Options > Setup to open the Setup window. From this window you can:
•Set the calibration parameters
•Identify the sensor you are using
•Set tolerances
•Select which display to calibrate on a
•Control the calibration timing
•Set the paths for saving .chr files and LUTs
After you have made all of your selections on the various tabs, click Save Settings to save all the settings in a .ini file. By default, settings are saved to the kdm.ini file. When the system opens, it automatically loads the settings that you save in the kdm.ini file. Save your settings with a different file name to create a customized .ini file. See “Saving and Loading Settings” on page 30.
2 4 | K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 1 U s e r ’ s G u i d e |
